User`s guide

Index
IN-2
device mapping, B-1
CPU I/O address, B-3
CPU memory address, B-2
I/O address, B-4
PCI configuration space address, B-6
disk drive
configuration guidelines, 7-1
DMA channel assignments, B-5
drive IDs
SCSI, 7-5
E
EISA expansion boards
installing, 8-15
EISA/PCI scan order
examples, 8-6
EPP3SMC.EXE utility, 2-3
error messages, 4-6
POST OCP, 4-9
server status, 4-6
expanding your server
tools needed, 3-20
expansion boards
adding EISA, 8-16
adding ISA, 8-12
adding PCI, 8-19
installing, 8-11
relocating, 8-20
expansion slots
maximum current limitation, A-3
external devices
disconnecting, 3-2
external SCSI bus
connecting, 7-20
external SCSI devices
installing, 7-20
external SCSI storage box
installing, 7-22
F
forgetting your password, 10-5
front view
server, 3-6
H
hot-swap devices
SBB LED indicators, 7-18
I
identfying server boot device, 8-4
identifying PCI devices
using the SCU, 8-8
initial troubleshooting, 11-2
input power requirements, A-4
installing
EISA expansion boards, 8-15
expansion boards, 8-11
external SCSI devices, 7-20
external SCSI storage box, 7-22
ISA expansion boards, 8-12
optional drives, 7-9
PCI expansion boards, 8-17
server side panels, 3-5
SIMMs (main logic board, 6-6
SIMMs (memory module), 6-8
installing devices
expansion brackets, 7-14
hot-swap drive bay, 7-16
top-right drive bay, 7-10
top-right drive bay (full-height), 7-12
installing server at a new location, D-4
interrupt levels
server, B-4
ISA expansion boards
installing, 8-12