User`s guide

Caring For Your Server
D-3
Moving the Server
Perform the following steps before shipping or moving the server:
1. Back up all files stored on all hard disk drives.
2. Turn off the server (the monitor automatically shuts off).
3. Disconnect the power cord from the wall outlet, then from the back
of the server.
3. Disconnect the monitor cable from the back of the server.
4. Disconnect the keyboard cable from the back of the server.
6. Disconnect the mouse cable from the back of the server.
7. Disconnect any other external peripheral devices, such as printers
and modems.
8. Insert a drive protection card in all 5¼-inch and 3½-inch diskette
drives (if applicable). If you do not have drive protection cards, use
blank diskettes.
9. Package the server as described in the following section, "Packing
the Server."
Packing the Server
If you are moving the server a short distance (from one room to another in
the same building), you do not have to pack the server. If you are shipping
the server or moving it by vehicle, pack the server to avoid damage.
Pack the server in the original packing material and containers. If you did
not save the boxes and packing material, use a sturdy carton and cushion
the server well to avoid damage.