User`s guide

SCU Features
C-9
Security Options Group
Menu Fields Settings Comments
Supervisor
password
Not
installed
(1)
Installed
Allows you to set a supervisor password.
If set, you will be prompted to enter a
password prior to accessing the SCU.
User password Not
installed
(1)
Installed
Can only be set in the condition that the
Supervisor password is set. This password
functions with “Password on Boot” or “Quick
Lock Hot-Key.”
Password on boot Enabled
Disabled
(1)
Enables or disables password entry on boot. If
enabled, the server will prompt you to enter the
password, either the User password or the
Supervisor password.
Quick lock hot-key Disabled
(1)
Alt-Ctrl-F1
through
Alt-Ctrl-F12
Enables or disables the Quick Lock function.
When enabled, you can lock both the keyboard
and PS2 mouse by pressing the defined hot
key, Alt-Ctrl-[key].
During the lock state, if a user password is
entered, the keyboard and PS2 mouse will
function again.
Diskette access Supervisor
User
(1)
If set to supervisor, the diskette can only be
accessed if the server is booted via a
supervisor password. Otherwise, the diskette is
free to be accessed.
Network server Disabled
(1)
Enabled
When enabled, the server does not require a
keyboard to function and therefore, keyboard
error messages which might occur during
POST will be ignored.
System backup
reminder
Disabled
(1)
Daily
Weekly
Monthly
Allows you to display a backup reminder
message at boot (daily, every Monday, or the
1
st
of every month).
Virus check
reminder
Disabled
(1)
Daily
Weekly
Monthly
Allows you to display a virus check reminder
message at boot (daily, every Monday, or the
1
st
of every month).
(1)
Factory default setting