User`s guide

SCU Features
C-3
System Management Group
Menu Fields Settings Comments
System reserved
resources
Not user selectable
Installed as a
default
(1)
Always shown as installed. Select [Enter] to display
the Asset number of the server. The Asset number
can be changed by the user.
Main logic board
information
Not user selectable
Installed as a
default
(1)
Select [Enter] to display main logic board information
including Asset number, Serial number, Artwork
Revision number, Model number, and System ID. The
Asset number is the only item that can be changed
by the user.
CPU module 1
information
Not user selectable
Installed as a
default
(1)
Select [Enter] to display main logic board information
including Asset number, Serial number, Artwork
Revision number, Model number, and System ID. The
Asset number is the only item that can be changed
by the user.
CPU module 2
information
Not user selectable
Not installed as a
default
(1)
If CPU module 2 is installed, select [Enter] to display
CPU module 2 information including Asset number,
Serial number, Artwork Revision number, Model
number, and System ID. The Asset number is the
only item that can be changed by the user.
Memory module
1 information
Not user selectable
Installed
If memory module 1 is installed, select [Enter] to
display memory module 1 information including Asset
number, Serial number, Artwork Revision number,
Model number, and System ID. The Asset number is
the only item that can be changed by the user.
Memory module
2 information
Not user selectable
Installed
If memory module 2 is installed, select [Enter] to
display memory module 2 information including Asset
number, Serial number, Artwork Revision number,
Model number, and System ID. The Asset number is
the only item that can be changed by the user.
(1)
Factory default setting