User`s guide

Problem Solving and Troubleshooting
11-11
Monitor Troubleshooting
Problem Possible Cause Action
Monitor power indicator is
not on.
Monitor is turned off.
Power cord is not
connected.
No power at wall outlet.
Power indicator is
defective.
Turn on the monitor.
Connect the power cord to the server.
Use another outlet.
Contact your Digital service
representative.
No screen display. Configuration error.
Monitor brightness and
contrast controls are
incorrectly set.
Monitor has failed.
Run the SCU to configure the server
for video operation.
Adjust the monitor brightness and
contrast controls.
Replace monitor, or contact your
Digital service representative.
Distorted, rolling, or
flickering screen display,
or wrong/uneven color.
Monitor incorrectly
adjusted.
Monitor signal cable
incorrectly installed.
Adjust accordingly.
Straighten any bent connector pins
and then reconnect.
continued