User`s guide

Problem Solving and Troubleshooting
11-5
Problem Possible Cause Action
Server operates incorrectly
after installing optional
expansion board.
Expansion board installed
incorrectly.
Did not run SCU to
configure expansion board
after installation.
Did not install CFG file for
expansion board.
Expansion board has
failed.
Remove expansion board and
reinstall.
Run the SCU to properly configure
expansion board. Refer to Chapter 8.
Run SCU and add CFG file (if
necessary).
Remove expansion board and reboot.
If server boots without errors, replace
expansion board.
Server operates incorrectly
after installing optional
memory (SIMMs).
Memory configured
incorrectly.
SIMMs installed
incorrectly.
SIMMs have failed.
Memory module installed
incorrectly.
Memory module failed.
Check that the memory configuration
is according to the memory guidelines
explained Chapter 6, “Installing
Additional Memory.”
Remove SIMMs and reinstall.
Replace SIMMs.
Reinstall memory module.
Replace memory module.
continued