User`s guide

Installing Expansion Boards
8-11
Enter the Advanced menu in the SCU.
Select View additional system information menu. Select Board
specifications to view slot allocations. Select System specifications to
view detailed information for each EISA/PCI device including board ID,
length, etc. Select Used resources to view IRQ, I/O Port, and memory
assignments. Select Available resources to view unassigned IRQs, DMAs,
I/O ports, and memory addresses.
Set Verification Mode Menu
The SCU allows you to select whether you would like to be automatically
notified of changes in your server’s configuration, or whether you would
like to verify the configuration manually.
Enter the Advanced menu in the SCU.
Select Set verification mode menu. Choose Automatic to enable the server
to verify the configuration routinely when the SCU is invoked, or select
Manual to enable verification of the configuration using the Verify option in
the Step 3 screen.
Maintain SCI File Menu
You can save the system configuration information to a file.
Enter the Advance menu in the SCU.
Select Maintain SCU files menu. Select Open... to display information from
a previously created .SCI file. The current configuration information will be
lost. Select Save as... to save the current configuration information to a
file.
Installing Expansion Boards
The following sections describe how to install ISA, EISA, and PCI
expansion boards. Detailed procedures on running the SCU before
installing ISA expansion boards and after installing EISA and PCI
expansion boards are also included.