User`s guide

Installing Optional Disk and Tape Drives
7-10
Installing a Half-Height 5¼-Inch Device
into the Top-Right Drive Bay
To install a half-height 5¼-inch device into one of the top-right drive bay
slots, perform the following:
1. Turn off your server.
2. Disconnect all external devices, ac power, and monitor power.
3. Unlock and the remove side panels.
4. Unlock and open the door.
5. Remove the plastic filler panel by pushing it out from inside the
server.
6. Remove the bracket from the drive bay (inside, left) and attach it to
device.
7. Insert the device into the drive bay slot from the front.
8. Secure the device to the slot using the supplied mounting screws.
9. If applicable, replace the plastic filler panel.