User`s guide

Installing Optional Disk and Tape Drives
7-2
CD-ROM Drive Configuration Guidelines
• The factory installed SCSI CD-ROM drive has its SCSI ID set to 6
(in most configurations).
• The CD-ROM drive should always be connected to the factory
installed Adaptec SCSI controller to support the bootable
ServerWORKS Quick Launch CD.
SCSI Configuration Guidelines
The following sections describe the SCSI configuration guidelines that
must be adhered to so your server operates correctly after installing and
connecting SCSI devices.
SCSI ID and Termination
• Your server supports up to 10 internal SCSI devices, including
seven SBBs, one CD-ROM drive, and two half-height devices
located in the bays above the SBB area.
• These devices can be connected on either wide or narrow busses,
single or multiple channels. Limitations on connecting these
devices might also be based on the manufacturer’s design.