Technical data

Digital PRIORIS XL ServerDigital PRIORIS XL Server Pass / Fail CriteriaPass / Fail Criteria
MCS Logistics Engineering - NijmegenMCS Logistics Engineering - Nijmegen 8585
P
R
I
O
R
I
S
X
L
Chapter 6 Pass / Fail Criteria
As Final Acceptance Test the following tests should be run to meet the Pass/Fail criteria:
As Final Acceptance Test’ the following tests should be run to meet the Pass/Fail criteria:
1) Successful completion of the POST tests.
2) Successful completion of the following QAPLUS/fe module tests (one pass):
♦ System Board (All Tests)
♦ Memory (All Tests)
♦ Video (All Tests)
♦ Hard Disk (All Tests, except: Sequential write/read and (Destructive Test !!)
Sequential write/random read (Destructive Test !!))
♦ Floppy Disk (All Tests)
♦ Keyboard (All Tests)
♦ COM Ports (All Tests)
♦ LPT Ports (All Tests)
♦ Pointer device (All Tests)
3) Successful bootstrap of the on the computer installed Operating System.
Operating Systems Supported:
◊ Windows for Workgroups 3.11
◊ Windows NT and Windows NT Server 3.5
◊ OS/2 version 2.1
◊ SCO Unix with MPX, SCO Network System
◊ SCO ODT v3.0, SCO Enterprise System
◊ Novell Netware 3.12 and 4.1
◊ Novell SFTIII 3.11
◊ Banyan Vines
Remove any software that was put on the hard drive to enable repair of the system before shipping.
When completed, carefully clean outside of unit with cleaning solution.