Technical data

Service ProceduresService Procedures Digital PRIORIS XL ServerDigital PRIORIS XL Server
5656 MCS Logistics Engineering - NijmegenMCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
X
L
Installing Video Memory
The server comes standard with 512 KB of video memory. this amount can be increased to 1 MB by
installing a 512 KB video memory DRAM chip in the designated socket on the main logic board.
To install the video memory upgrade chip, perform the following:
1) Turn off the server.
2) Disconnect external devices, ac power, and monitor power.
3) Unlock and remove side panel.
4) Install video memory DRAM chip.
5) Replace and lock side panel.
6) Connect external devices and restore power.
7) Run SCU to configure server.
Refer to, “Configuring The Server”.
CAUTION
Make sure pin 1 on video memory DRAM chip is aligned with location on socket
(see designation A on Figure 3-16). Incorrect installation can cause faulty server
operation.
A
DEC00230-7
Figure 3 - 16 Installing Video Memory