Technical data

Digital PRIORIS XL ServerDigital PRIORIS XL Server Service ProceduresService Procedures
MCS Logistics Engineering - NijmegenMCS Logistics Engineering - Nijmegen 4747
P
R
I
O
R
I
S
X
L
Removing a 3½-Inch Mass Storage Device (Internal Drive Bay)
To remove a 3½-inch mass storage device from the internal drive bay:
1) Turn off external devices and server.
2) Disconnect external devices, ac power, and monitor power.
3) Unlock and remove side panel.
4) Disconnect power and ribbon cables.
5) Remove mounting screws.
6) Pull drive from internal drive bay.
7) Remove expansion brackets.
DEC00248
Figure 3 - 8 Removing a 3½-Inch Mass Storage Device (Internal Drive Bay)