Technical data

Digital PRIORIS XL ServerDigital PRIORIS XL Server Service ProceduresService Procedures
MCS Logistics Engineering - NijmegenMCS Logistics Engineering - Nijmegen 4545
P
R
I
O
R
I
S
X
L
Part Removal and Replacement
Removing the 3½-Inch Diskette Drive
To remove the 3½-inch diskette drive:
1) Turn off external devices and server.
2) Disconnect external devices, ac power, and monitor power.
3) Unlock and remove side panel.
4) Disconnect power and ribbon cables.
5) Remove two screws securing drive to chassis.
6) Slide drive forward out of server.
Figure 3 - 6 Removing the 3½-Inch Diskette Drive