Specifications

Prioris Servers4

Install any internal options

If you plan to use Quick Launch to install your Network

Operating System, your server must meet the following

minimum requirements to proceed with the server in-

stallation:

■ 16 MB of RAM

■ SVGA monitor

■ 540 MB minimum hard disk drive

■ Two or three button mouse

■ CD-ROM drive attached to the bootable SCSI controller

■ Keyboard

If you have options to install, install them now.

1. Unlock door

2. Remove side panel

3. Install options

NOTE

ISA cards should be installed after you run the System

Configuration Utility in Step 6 or 7 since the SCU will list

IRQs already used.

CAUTION

Before touching any circuit board or component,

wear an anti-static wrist strap, properly grounded

to the server chassis, or touch the metal frame to

discharge any static electricity.

Refer to the following chapters in the System Reference

manual for detailed information.

■ Server Software and Utilities

■ Server Components

■ Installing Additional Memory

■ Installing Disk and Tape Drives

■ Installing Expansion Boards

■ Connecting SCSI Adapters

Also, refer to the documentation that came with the option

kit for specific installation instructions.