Technical data

Installing Additional Memory
5-7
PRIORIS XL 6000
Installing Additional Video Memory
Your server comes standard with 512 KB of video memory. You can increase
this amount to 1 MB by installing a 512 KB video memory DRAM chip in the
designated socket on the main logic board.
To install the video memory upgrade chip, perform the following:
1. Power down your server.
2. Disconnect all external devices, ac power, and monitor power.
3. Unlock and remove the side panel.
4. Align the detent of the new video memory chip with the beveled end of
the socket on the main logic board (A, Figure 5-3).
5. Press down firmly on the video memory chip until it fully seats in the
socket.
6. Replace and lock the left side panel.
7. Connect all external devices and restore power.