Technical data

SCU Features
C-8
Boot Subsystem Group
Menu Fields Settings Comments
First boot device
Boot floppy
(1)
Boot hard disk
Boot IDE CD-ROM
Boot network
Each time your server boots, it will load your
operating system from the sequence selected.
Second boot
device
Boot disabled
Boot floppy
Boot hard disk
(1)
Boot network
Each time your server boots, it will load your
operating system from the sequence selected.
Third boot device
Boot disabled
(1)
Boot floppy
Boot hard disk
Boot network
Each time your server boots, it will load your
operating system from the sequence selected.
Fourth boot device
Boot disabled
(1)
Boot floppy
Boot hard disk
Boot network
Each time your server boots, it will load your
operating system from the sequence selected.
Display <F1> for
setup message
during POST
Enable
(1)
Disable
Enables or disables the <F1> setup prompt each
time your server boots.
Require user
interaction on
POST errors
Enable
(1)
Disable
Enabling this option causes your server to pause
and display a setup entry or resume the boot prompt
if an error occurs at boot.
Disabling this option causes your server to always
attempt to boot regardless of a setup entry or error.
(1)
Factory default setting
SCSI ROM BIOS Options Group
Menu Fields Settings Comments
SCSI-A ROM
BIOS scan
Enable
(1)
Disable
Enables or disables your server’s
SCSI-A ROM BIOS scan option.
SCSI-B ROM
BIOS scan
Enable
(1)
Disable
Enables or disables your server’s
SCSI-B ROM BIOS scan option.
(1)
Factory default setting