Technical data

Field Service Replacement
11-8
Removing and Replacing the CD-ROM Drive
1. Open the security door.
2. Turn off the server.
3. Disconnect the ac power cord.
4. Unlock and remove the side panel.
5. Disconnect the power, data, and (if installed) audio cables from the CD-ROM
drive.
6. Remove the retaining screws from the drive bay.
7. Slide the drive out from front of the drive bay by applying pressure at the rear
of the CD-ROM drive.
8. Set jumpers on the new CD-ROM drive identically to those on the removed
CD-ROM drive.
9. Replace the CD-ROM drive by performing the removal steps in reverse
order.