Technical data

Troubleshooting
10-13
PRIORIS XL 6000
CD-ROM Troubleshooting
Problem Possible Cause Action
Cannot access the CD-
ROM drive. Error message
reading drive x.
Device drivers not installed.
No disk in the CD-ROM
drive.
Incorrect SCSI ID assigned.
Tray open.
Install correct device drivers.
Insert a disk.
Make sure correct SCSI ID is
assigned. Refer to Chapter 6.
Close the tray.
Power is on but indicator
shows no activity.
No disc or tray is open.
Check cable connections.
Insert a disk and close the tray.
Make sure cables are correctly
connected.
Disk is spinning but drive is
idle.
Application software not
running.
Run application software.