Technical data

Troubleshooting
10-9
PRIORIS XL 6000
Problem Possible Cause Action
Server does not
recognize an external
SCSI device.
SCSI device jumpers
incorrectly set.
SCSI ID conflicts.
Terminating resistors not
removed from the SCSI
device.
SCSI controller has failed.
Loose SCSI cable.
SCSI cable incorrectly
installed between SCSI
controller and rear panel
connector or external SCSI
device and rear panel
connector.
SCSI device has failed.
Refer to the supplied kit installation
instructions.
Refer to the supplied kit installation
instructions.
Remove terminating resistors. Refer to
the supplied kit installation instructions.
Contact your authorized service
provider.
Secure all cable connections.
Refer to Chapter 8 for cabling
information.
Replace SCSI device.
continued