Technical data

Troubleshooting
10-6
Problem Possible Cause Action
Server operates incorrectly
after installing optional
expansion board.
Expansion board installed
incorrectly.
Did not run SCU to
configure expansion board
after installation.
Did not install CFG file for
expansion board.
Expansion board has failed.
Remove expansion board and
reinstall.
Run the SCU to properly configure
expansion board. Refer to Chapter
7.
Run SCU and add CFG file (if
necessary).
Remove expansion board and
reboot. If server boots without
errors, replace expansion board.
Server operates incorrectly
after installing optional
memory (DIMMs).
Memory configured
incorrectly.
DIMMs installed incorrectly.
DIMMs have failed.
Check that the memory
configuration is according to the
memory guidelines explained
Chapter 6, “Installing Additional
Memory.”
Remove DIMMs and reinstall.
Replace DIMMs.
continued