Specifications

Prioris Servers6
Connect the power cord
Connect the ac power cord to the server, then to your
power outlet.
CAUTION
The voltage select switch must match the
voltage supplied by your outlet. In North
American countries, 115 V ac current is
common. In other countries, 230 V ac
current is common. Make sure that the
voltage select switch is set to the correct
voltage. If it is not set correctly, you can
damage your server. The voltage select
switch is located above the monitor power
outlet.
Do not attempt to modify or use an
external 100 V ac (Japan only) or 115 V ac
power cord for 220-240 V ac input power.
Modifying either power cord can cause
severe equipment damage.
4