User`s guide

A-2 Product Specifications
Table A-1: Technical Specifications
Parameter Specification
Buffers
64 Kb per port
Addresses
4096
Addresses Table
Transparent, automatic self-learning at full
wire speed. Cache aging time manageable.
Custom filtering by hardware address and
ports.
Store and Forward Switching
Provides complete runt and error filtering on
all packets. Flow control prevents packet
loss.
Network Management
In-band and out-of-band SNMP w/MIB II,
private MIB, and out-of-band serial console
support
Filter/Forward Rate
700,000/700,000 p/s
Status Indicators
RX, TX, Speed, Link, Coll/FD, Flow Control
General Indicators
Management activity, SNMP presence,
power supply status, device failure detection
Boot and Configuration
NVRAM configuration loaded on power up
and fully downloadable. Firmware local/
remote downloadable.
Interfaces
UTP RJ-45, RS232 DB-9, two slots for dual
plug-in modules
Standards Supported
FDSE (Full Duplex Switched Ethernet),
IEEE 802.3, IEEE 802.3u, IEEE 802.1d
(Bridge/Spanning Tree), SNMP (RFC 1157),
MIB II (RFC 1213), Bridge MIB (RFC
1493), RMON Group 1, 2, 3, and 9 (RFC
1757)