User`s guide

Switching Statistics Commands
7-42 Using the Administrative Interface
Switching Statistics Commands
This section contains instructions for displaying the switching statistics using the
Administrative Interface. The following commands provide full physical layer
information as well as inter-port switching statistics.
clr-cnt
This command clears the Ethernet and bridging counters.
get-eth-cnt
Usage:
get-eth-cnt <port-number>
This command displays the Ethernet statistics counters for the specified port number.
This is almost identical to the Ethernet-like statistics group of the Ethernet MIB.
SYS_console> get-eth-cnt 1
Ethernet Statistics for port 1
=================================
Transmit OK : 0
Underflow Errors: 0
Exces Coll Errors: 0
Exces Fctrl Errors: 0
Receive EOF : 238559
Receive OK : 238558
Overflow Errors: 0
CRC Errors: 1
Alignment Errors: 1
Runt Errors: 1
Lost/Fctrl Errors: 0
Too Long Errors: 0
=================================
SYS_console> _
get-colls-cnt
Usage:
get-colls-cnt <port-number>
This command displays the Ethernet collision statistics for the specified port number.
This is almost identical to the Ethernet-like collisions statistics group of the Ethernet
MIB and shows the collision count distribution for this port.