User`s guide

Spanning Tree Commands
7-38 Using the Administrative Interface
set-prt-enb
Usage:
set-prt-enb <port_number> {enable|disable}
This command enables or disables a port in the Spanning Tree. The
port_number
value is the integer port number. This is equivalent to setting the MIB variable
dot1dStpPortEnable (RFC 1493).
set-prt-pcost
Usage:
set-prt-pcost <port_number> <path_cost>
This command sets the Spanning Tree port path cost. The
port_number
value is the
integer port number, and the
path_cost
value is an integer path cost in the range
1...65535. This is equivalent to setting the MIB variable dot1dStpPortPathCost (RFC
1493).