User`s guide

Using the Administrative Interface 7-35
Virtual LAN Commands
set-mon-port
Usage:
set-mon-port <port>
This command sets the port to be monitored. The value
port
is a decimal port number.
All traffic from this port will be duplicated on the monitoring port specified by the
monitor command.
monitor
Usage:
monitor <port>
This command sets the monitoring port. All traffic from the port specified by set-mon-
port will be duplicated on port. The value
port
is a decimal port number.
stop-mon
This command ends port monitoring.
get-nv-mon
This command retrieves the NVRAM based monitoring configuration.
save-mon
This command saves the running monitoring configuration to the NVRAM.
clear-nv-mon
This command clears the monitoring configuration from the NVRAM.