User`s guide

System Commands
7-8 Using the Administrative Interface
System Commands
The system commands allow you to display and set the system-related parameters.
sys-stat
The sys-stat command displays general status information about the Ethernet switch
and its SNMP Agent hardware and software:
SYS_console> sys-stat
MultiSwitch 300
SNMP Agent Software - Version V0.1x Feb 8 1997 01:27:29
SNMP Object ID is : < 1.3.6.1.4.1.36.2.15.3.19 >
System MAC Address : 00-00-F8-00-0A-5C
Switching Data Base Size: 4096
Total uptime(hundredths of seconds ): 68840
Total uptime(days, hh:mm:ss format): 0 days, 0:11:28.40
i/f 1 -- description [Port 1 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 2 -- description [Port 2 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 3 -- description [Port 3 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 4 -- description [Port 4 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 5 -- description [Port 5 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 6 -- description [Port 6 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 7 -- description [Port 7 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 8 -- description [Port 8 - 10/100 BaseTX Ethernet Port] -- status [up]
i/f 9 -- description [Port 9 - missing ] -- status [DOWN]
i/f 10 -- description [Port 10 - missing ] -- status [DOWN]
i/f 11 -- description [Port 11 - missing ] -- status [DOWN]
i/f 12 -- description [Port 12 - missing ] -- status [DOWN]
SYS_console> _
The screen displays the following information:
• Device name and type
• SNMP Agent software version and release date
• Device SNMP object ID
• Device MAC address
• System uptime in 1/100 seconds as well as in days, hours, minutes, and seconds
• Interface description and status