User`s guide

C-2 System Default Values
Table C-1: System Default Values
Command Set Value Default
console Password NONE
Prompt SYS_console>
system Software Filename flash12.hex
Parameter Filename param12.hex
ip BOOTP disable
TTL 10 (in range 1...255)
snmp Read Community public
Write Community private
Authentication Mode enable
Traps Manager NONE
switch-db Aging Time 300 seconds
port configuration Port Duplex HALF
Port Select AUTO
Port Flow Control ON
spanning tree Spanning Tree enable
Bridge Priority 32768 ((0-65535)
Bridge Max Age 20 seconds (6.0-40.0)
Bridge Hello Time 2 seconds (1.0-10.0)
Bridge Forward Delay 15 seconds (4.0-30.0)
Port Priority 128 (0-255)
Port Cost 1000/LAN speed in Mb/s