User guide

Page 4
• If you attempt to open an “aliased” folder to download one of its files with the
Colorwriter LSR Downloader, the Open button does not function as expected. When
you select an aliased folder (which appears in italics) and click the Open button, the
aliased folder is mistakenly placed in the window as if it were a file ready to be
downloaded.
Printing
• Macintosh users cannot print successfully to a Colorwriter shared by a Windows NT
server when the server is using TCP/IP to communicate with the printer.
When a Windows NT server sends jobs from a Macintosh to a Colorwriter over a
TCP/IP network, the jobs are printed as plain text. This is a side effect of the autosensing
feature of the TCP/IP port.
Two workarounds exist for this situation. Either the Macintosh client systems should
connect directly to the Colorwriter print queues (using AppleTalk), or the Windows NT
server should connect to the Colorwriter over AppleTalk. The Windows NT server can
capture the port, if desired, to prevent peer-to-peer connections.
• Printing a series of PostScript jobs over a PC’s parallel port, with Cover Page selected,
does not print individual cover pages.
Only one cover page is printed, and the document name is identified as the first print job
sent to the printer.
Low Toner
You can choose the action that the Colorwriter takes if the toner is low. If you set the
LOW
TONER ERROR
System Setup option to
YES
, the printer stops printing. If you set the option
to
NO
, the printer displays the low toner warning but continues to print.
N
OTE
:
If you power up the printer and the start page is not printed, check to see if the
LOW
TONER ERROR
System Setup option is set to
YES
.
Power Saver Mode
• If the printer is in Power Saver Mode, changing the language setting does not change the
language used for the Power Saver Mode message until a job is printed and the printer re-
enters Power Saver Mode.
• If you change Power Saver Mode settings from
OFF
to any value when the printer is
offline, the printer immediately enters Power Saver Mode.
• If the
POWER SAVER MODE
message remains on the printer control panel display while the
printer is printing, open and shut the front door to restore the display of normal LCD
status messages.