Technical data

2
2-4 Unpacking the printer
13. With a Phillips screwdriver, unscrew the transfer drum locking screw; it is an
orange plastic knob with a label.
14. Remove the transfer drum locking screw by pushing the orange knob up and out
toward you.
15. Open the fixing unit cover, which is identified in Appendix C of the User Guide.
16. Remove the orange left and right pressure release spacers by lifting them up and
out toward you.
REMOVE WITH SCREW.
RETIRER AVEC LA VIS.
ZUSAMMEN MIT DER
SCHRAUBE ENTFERNEN.
SAQUE JUNTO CO
ELTORNILLO.
TOGLIERE CON LA VIS
ÉlÉWÇ∆Ç∆LJDžéÊÇËäOǵǃÇ≠ÇæÇ≥
Ç¢ÅB