Technical data

6
6-69 Installing Windows software
The NET_WSCK.INI is installed to the active Windows directory on your hard disk:
For Windows 95 systems: c:\windows\
For Windows NT systems: c:\winnt35\
Running the Colorwriter LSR Manager automatically edits the NET_WSCK.INI file,
adding network information about your printer that is necessary for running the
Colorwriter LSR utilities. You can also edit the NET_WSCK.INI file by opening it in
a text editor such as Microsoft Notepad.
The NET_WSCK.INI file is annotated to explain the entries. After the
Colorwriter LSR Manager edits a NET_WSCK.INI, the entries for a single
Colorwriter are similar to one of the following examples:
•
For utilities on IPX networks:
[ConfigServers]
Server1=Colorwriter LSR
[Colorwriter LSR]
IPXAddr=00 00 FF FF 00 C0 85 FF FF FF
Device1=DECcolor
• For utilities on TCP/IP networks: [ConfigServers]
Server1=Colorwriter LSR
[Colorwriter LSR]
;IPXAddr=00 00 00 00 00 00 00 00 00 00
Device1=DECcolor
NOTE: DECcolor is the required device name for this file. Do not change it.
If the Colorwriter LSR utilities connect to the Colorwriter successfully, it means
that the NET_WSCK.INI is correctly configured, and you can copy the file to other
workstations that will run the utilities.