Technical data

13.2.3 Output May Be Clipped on the LN17ps

Printer output on the LN17ps might have been clipped when the following

conditions were met:

• you speciﬁed an INPUT_TRAY value of FRONT or MULTIPURPOSE

• you speciﬁed a sheet size

• the imageable area of the requested sheet size was larger than the console-

speciﬁed size for the manual tray

To avoid such clipping, use INPUT_TRAY=MANUAL_FEED.

When you specify an INPUT_TRAY value of FRONT or MULTIPURPOSE for the

LN17ps along with a sheet size, DCPS V1.4 now requires you to specify the sheet

size that matches the console-speciﬁed manual size.

13.2.4 Erroneous TRAYSUBST Messages

Erroneous DCPS-I-TRAYSUBST messages may have occurred for speciﬁc output

trays for the following printers:

Printer Output Tray Substitution Reported

LN17ps Top OCT

LN17ps Upper OCT

LPS17 LCOS 2

LPS32 LCOS 4

LPS40 LCOS 4

The correct tray was selected even though the erroneous TRAYSUBST message

was issued.

13.2.5 Required Device Control Module Not Found for PrintServer Printers

If the ﬁrst job submitted to a DIGITAL PrintServer printer contained an invalid

parameter, a ‘‘Required device control module LPS$$INITPSDEVICE not found’’

error message was issued and the print queue stopped. This error occurred only

if the ﬁrst job printed contained an invalid parameter.

This error did not occur with desktop printers.

13.2.6 Erroneous Connection Termination Error for DEClaser 5100

DCPS was unable to communicate with the DEClaser 5100 via the NIC card, and

would instead consistently fail with CONTERMINATED errors.

This problem was erroneously believed to have been ﬁxed in DCPS V1.3, as

reported in Section 14.2.2.

13.2.7 PrintServer Printer Hangs When Network Connection Is Lost and Jobs

Are Pending

A DCPS print queue could hang when all the following conditions were true:

• A DCPS print job was pending (that is, not the current job) on the DIGITAL

PrintServer printer

• The DCPS to PrintServer printer interconnect was TCP/IP

• The network connection to the PrintServer printer was lost

13–2 DCPS Version 1.4 Information