Technical data

11
DCPS Version 1.5-1 Information
11.1 DCPS Version 1.5-1 Highlights
DECprint Supervisor Version 1.5-1 adds support for the DIGITAL Laser Printer
LN20.
You can find more information about this printer in Chapter 4 of these release
notes.
11.2 DCPS Version 1.5-1 Fixes
This section lists problems that have been corrected in DCPS V1.5-1.
11.2.1 Colorwriter LSR 2000 Jobs Remain in Starting State
When attempting to print to the Colorwriter LSR 2000 printer with DCPS V1.5,
the job would remain in a starting state and never print.
11.2.2 CONFIDENTIAL Does Not Appear When Using LAYUP or NUMBER_UP
If you specified the LAYUP or NUMBER_UP parameter when printing the
DCPS example file CONFIDENTIAL.PS with DCPS V1.4 or later, the word
"CONFIDENTIAL" would not appear on the output.
11.3 DCPS Version 1.5-1 Changes
This section describes changes made in DCPS V1.5-1.
11.3.1 New Paper Sizes
DCPS now supports the 12x19.5 inch (864x1404 mm) and 13x19 inch (936x1368
mm) paper sizes. You can specify 12X19.5 or 13X19 as the logical PAGE_SIZE
value for any printer, and as the physical SHEET_SIZE value for the LN20
printer. Note that the LN20 console and documentation refer to the 12x19.5 and
13x19 paper sizes as 12x19 and Universal respectively.
DCPS Version 1.5-1 Information 11–1