User manual

DIGITAL LN15-DA Duplexing Unit User Manual 5
Notice:
If your printer is equipped with an optional paper feeder, dismount
the printer from the paper feeder. Then, mount the duplex unit on
the paper feeder, lock the paper feeder, and the printer on the duplex
unit.
2. Connect the power cord to the printer.
3. Close the rear unit until its lock lever clicks. Connect the
interface cable. If necessary, mount the multi-function feeder.
Then, connect the power cord to the power outlet.
Caution:
Be careful that your fingers or hair is not squeezed between the
printer and the duplex unit when closing the rear unit.
You can check two-sided printing using the printer control panel.
1. Load several sheets in paper tray 1.
2. Turn power on.
The printer control panel
message shows
READY
with the ONLINE
indicator on.
3. Press the READY button to put the printer offline.
The ONLINE indicator
turns off with the
READY
message unchanged.
4. Press the MENU button to make the printer enter the menu
mode.
The message changes to
SETUP MENU PAGE
FORMAT MENU.
☞
Testing Duplex
Printing Offline
READY
G
READY
SETUP MENU
PAGE FORMAT MENU
!