Installation guide

Installation Guide DIGITAL Laser Printer LN15 7
2. SETTING UP YOUR PRINTER
2.1. UNPACKING THE PRINTER
Use the following procedure to unpack the printer. To ensure that your printer was
not damaged during shipment, follow the entire procedure.
NOTE Save the packing materials of all
components and options in case you ever have to
move or ship the printer to a new location.
1
Open the box and remove everything except the printer from the shipping
carton. Put your hands into the transport grips of the printer and lift the
printer out of the shipping carton.
2
Remove the protective covering and tape from the printer body. Make sure
all the foam is removed from the printer.
3
Open the upper door and remove the
protective materials from the print unit.
Remove the protective sheet ‘
A
’ by
pulling the tape ‘
B
’ until its blue end is
visible. Also remove the restraint
cushions ‘
C
’.
4
Open the rear stacker
and remove the restraint
cushion. Make sure that
the paper guide is
pushed down in the
locked position.
NOTE Your printer will not work, unless the
paper guide is in the locked position.