Installation guide

Installation Guide DIGITAL Laser Printer LN15 31
3.
Raise the left and right
levers of the feed roller
(little green handles) and
open the paper tray(s).
4.
Remove the jammed sheet of paper
gently from under the feed roller.
5.
Return the two levers to their original positions (pull the levers down
toward you) and close the paper tray(s). Install the print unit again and
close the top cover. You may now continue printing.
WARNING Leaving the two levers raised causes
damage to the levers when the print unit is
installed.
6.
Open the rear stacker. Draw out the paper guide by first pushing up the
top edge of the paper guide and then by pulling out the paper guide.
7.
Gently remove the jammed sheet.
Avoid pieces of the sheet remaining
inside the printer.
8.
Close the rear stacker. Do not forget to
lock the paper guide properly. You may now resume your print job.