Installation guide

Installation Guide DIGITAL Laser Printer LN15 25
3 Print to the queue
lpr - <Pqueue_name>/etc/hosts
2.17.4. W
INDOWS
NT C
ONFIGURATION
To install a print queue using NetBIOS, please refer to the DIGITAL Laser
Printer LN15 Ethernet Interface User Manual. To install print queues using
TCP/IP, follow the hext steps:
1
Install TCP/IP software on the host, if it is not already installed.
2
Using the Windows NT ARP and Ping commands, set the IP address of
the interface. Optionally set a subnet mask and default gateway address
by Telnet to port 7000 of the interface.
3
Install your printer driver, select the Digital Network Port for your printer
and define the port type as Digital Server (via TCP/IP). Enter the port
number 3001. For details, see the DIGITAL Laser Printer LN15 Ethernet
Interface User Manual.
2.17.5. W
INDOWS
95 C
ONFIGURATION
1
Install TCP/IP software on the host, if it is not already installed.
2
Using the Windows 95 ARP and Ping commands, set the IP address of
the interface. Optionally set a subnet mask and default gateway address
by Telnet to port 7000 of the interface. For details, see the DIGITAL
Laser Printer LN15 Ethernet Interface User Manual.
2.17.6. N
ET
W
ARE
C
ONFIGURATION
(NDS)
If you are using Novell NetWare versions 2x, 3x or 4.0 with bindery emulation,
please refer to the the DIGITAL Laser Printer LN15 Ethernet Interface User
Manual for details. If you are runnming Netware version 4.o or greater, perform
the following steps on each file server that needs to access the interface queues:
1
Register to use NDS. Use the configuration software supplied on the
DIGITAL Laser Printer LN15 CD-ROM.
2
Log into the file server as Admin and type PCONSOLE.
3
Complete the Quick Set-Up configuration. Press F10.
4
To allow NDS on the interface, use Define Protocol NetWare DSLicense
string.
5
Use Define Protocol NetWare DSTree to define the directory service tree
on which the print server is located.
6
Use Define Protocol NetWare DSContext to define the directory services
context for the server.
7
Use Show Protocol NetWare Access to ensure that aat least one file
server in the directory services tree is in the access list.
8
Reboot the printer using Init Delay 0.
9
Enter the Netstat command to display information about the queues that
the print server found. If the queue is not in JobPoll, see troubleshooting
information in the DIGITAL Laser Printer LN15 Ethernet Interface User
Manual