Installation guide

Installation Guide DIGITAL Laser Printer LN15 23
2.16. CONNECTING THE PRINTER TO YOUR COMPUTER
The DIGITAL Laser Printer LN15P comes with a
Parallel interface (located on the rear side of your
printer, see drawing). The DIGITAL Laser Printer
LN15N-A and LN15N-B also have an Ethernet
interface installed (see drawing).
The test button (see drawing) allows you to print
an Ethernet interface configuration page (refer to
the DIGITAL Laser Printer LN15 Ethernet
Interface User Manual).
Windows drivers are available on the DIGITAL
Laser Printer LN15 CD-ROM provided with your
printer.
Because your DIGITAL Laser Printer LN15 supports the PCL 5e emulation and
the PostScript level 2 emulation, two types of printer drivers are made available on
the CD-ROM:
• One set of PCL Emulation printer drivers (under the folder Drivers/PCL)
• One set of PostScript printer drivers (under the folder Drivers/PS)
You may install both drivers in your system. Depending upon your application and
your document, one type of driver may be the most appropriate.
Once installed, the printer drivers are identified as follows:
• PCL Emulation printer driver : DIGITAL Laser Printer LN15
• PostScript printer driver : DIGITAL Laser Printer LN15 PS
For information on the availability of updated or other printer drivers, visit us at
http://www.printers.digital.com
NOTE The shipment of the DIGITAL Laser Printer
LN15 does not include interface cables. When
connecting your printer locally to your PC, you
will need a parallel cable with a maximum length of
2 meters.
LN15N-B
TEST
LN15N-A
TEST
LN15P