Installation guide

20 Installation Guide DIGITAL Laser Printer LN15
2.9. USING THE REAR STACKER (standard)
The printer has a rear stacker that allows you to eject sheets straight out the back
to minimize curl. It is recommended to use the rear stacker, printing envelopes,
overhead transparencies and labels.
1
Open the rear stacker.
2
Remove the paper support from
inside the stacker.
3
Set the paper support in
position. Insert the two ends of
the paper support into the
mounting grooves of the rear
stacker.
2.10. USING THE REAR STACKER (with optional duplexing unit)
With the optional duplexing unit installed, you must use the rear stacker of the
duplexing unit. It is recommended to use the stacker, printing envelopes,
overhead transparencies and labels.