Installation guide

Installation Guide DIGITAL Laser Printer LN15 19
5
Arrange the media edges by
rocking the cassette to gather
the edges of the stack
together to ensure correct
positioning of the media in the
cassette.
6
Return the cassette into the tray.
2.8. LOADING THE MANUAL FEED TRAY
The manual feed tray may be used for single sheets. However, you will have to
insert one sheet at a time. Usually, the manual feed tray is used for media other
than normal, like envelopes, labels and transparencies.
1.
Open the front cover.
2.
Adjust the paper guides for the
media format you are going to use.
By moving one of the guides, the
other guide will automatically move
also. This will ensure that the
media is always aligned properly.
NOTE Inserting a sheet in the manual feeder is
automatically detected by the printer. As a result
the sheet will be picked up and held by rollers.
The printer ‘assumes’ that this sheet must be used for
the next print job.