Installation guide

18 Installation Guide DIGITAL Laser Printer LN15
A.
Change the media size
setting by lifting the right
end of the green indicator
and position its triangle
mark to the size required.
B.
Adjust the rear media
guide by pushing the two
catches inward and
release the pins from the
holes. Then move the
rear media guide to the
size required (there are
media size marks in the
cassette).
C.
Adjust the side guides
(there are media size
marks in the cassette).
D.
Attach the correct media size label on the front of the cassette, in
case you install the tray for the first time. The labels are shipped with
your media tray. We suggest to do so in case you plan to use only one
media format in that particular cassette.
3
Lock the pressure plate of the
cassette. If the front of the pressure
plate is raised, push it down until
the pressure plate clicks into place.
4
Load the media. Make sure that the
tray is not overloaded.