Specifications

WARRANTY AND REGISTRATION
Every product of ElMeasure is warranted for 18 months from the date of invoice for the defects in materials and
workmanship when products are used in normal specified conditions. The warranty is void to the product which has
been damaged due to improper installation, improper handling, improper connections, neglect, misuse, accident, and
abnormal conditions of operation and natural calamities or acts of god. Any attempt of dismantling and unauthorized
repair or modifications shall also render the warranty null & void.
1. Failure of products during warranty In India
Customer shall report the failure to the nearest ElMeasure contact point or dealer at the earliest once noticed. ElMeasure
shall replace the product failed due to workmanship or defects in materials against receipt of failed product. Burnt,
blown, damaged products are not covered under warranty and hence no replacements shall be given.
In the event of product un-available for replacement at ElMeasure or dealer, same shall be arranged at the earliest.
Replacement of product is solely at the discretion of dealer or the ElMeasure representative who receive the failed
product.
ElMeasure SE may on a case to case basis, recommend for the advance replacement of product mentioning the reasons
and justifications for doing so. Sales Manager shall approve advance replacement in genuine cases. The defective
product shall be collected and sent to ElMeasure factory within 30 calendar days. Non compliance shall result in
debiting cost of the product to the Customer.
Burnt, abused, damaged products shall be forwarded to ElMeasure's Service Center at Bangalore for investigation,
transportation pre-paid. Upon investigation, If found the rectification is possible, an estimation for servicing is sent to
the customer. Rectification shall be done on receipt of approval for the charges with advance payment only.
2. Failure of products outside warranty In India
The defective products shall be forwarded to ElMeasure Service Center at Bangalore for rectification, transportation
pre-paid. Upon investigation, estimation for servicing is sent to the customer. Rectification shall be done on receipt of
approval for the charges with advance payment only.
ElMeasure, as a policy, do not provide replacement for the products outside warranty.
For Distributor / Dealer's use only
Seal
Invoice No.: Date: