Specifications

DISPLAY
Meaning
Power Factor
Active Energy Received
On Hours/Time
Power Factor R Phase/Y Phase/B Phase
Clear
VA - R Phase/Y Phase/B Phase
(W)Conversions of alphabets used
Load Hour
When using a modem interface between the host computer and
any remote device(s), ensure that the host computer is not used to set the
BAUD RATE parameter of any selected device outside the working range of
the modem. Doing so will cause that meter to cease communicating. Re-
establishing communication with that meter is possible through performing
the following:
1. Reset the baud rate of the remote device from its front panel to a
value within the working range of the modem.
2. Set the computer to communicate at the baud rate at which the
remote device has been set to communicate.
WARNING :
8
Parity
Identification number