Instruction manual

3–42 Troubleshooting
Making a Hex Code Printout
Step Key Result Notes
1. Make sure the printer is on. Raise the printer cover.
2. Press:
ON LINE
OFFLINE
CONFIG. CONTROL
3.
+
ENTER SWITCH
UNLOCKED
OFFLINE
CONFIG. CONTROL
Allows you to make
configuration changes.
4.
UNTIL
OFFLINE
MAINT / MISC
5.
MAINT / MISC
Hex Dump Mode
6.
Hex Dump Mode
Disable
7.
OR
Hex Dump Mode
Enable
Cycle through the choices.
8.
ENTER
Hex Dump Mode
Enable *
Asterisk (*) indicates this
choice is active.
9.
+
ENTER SWITCH
LOCKED
Locks the configuration
parameters.
10.
ON LINE
ONLINE
11. Go to the host computer and send a file. The printer outputs a hex dump. Refer to the ASCII chart
on page 3–43.
12. When the hex dump is complete, take the printer offline and change the Hex Dump Mode back to
Disable. Follow the steps outlined above and select Disable.