Instruction manual

3–38 Troubleshooting
Step NotesResultKey
12.
Printer Tests
Shift Recycle*
13.
OR
Printer Tests
All E’s
Cycle through the choices.
Refer to page 3–35.
14. To start
test:
R/S
Printer Tests
All E’s*
The test runs.
15. To stop
test:
R/S
Printer Tests
All E’s*
Stops tests.
16.
+
ENTER SWITCH
LOCKED
Locks the configuration
parameters.
17.
CLEAR
OFFLINE
CONFIG. CONTROL
Moves the printer out of
the menus to offline.
18. Examine the print quality. The characters should be fully formed and of uniform density.
19. When the print quality is acceptable, close the printer cover; press ON LINE to enable printing.