Instruction manual

3–37Troubleshooting
Selecting and Running Diagnostic Printer Tests
Step Key Result Notes
1. a) Load paper.
b) Install the ribbon.
c) Set top–of–form. (Refer to the Operator’s Guide.)
2. Press:
ON LINE
OFFLINE
CONFIG. CONTROL
The printer must be offline
to select diagnostic tests.
3.
+
ENTER SWITCH
UNLOCKED
OFFLINE
CONFIG. CONTROL
Allows you to make
configuration changes.
4.
UNTIL
OFFLINE
DIAGNOSTICS
5.
DIAGNOSTICS
Printer Tests
6.
UNTIL
DIAGNOSTICS
Test Width
7.
Test Width
Full Width*
8.
OR
Test Width
X
Cycle through the choices.
X = Full Width or
X = 80 columns.
9.
ENTER
Test Width
X*
Test width selected.
10.
UNTIL
DIAGNOSTICS
Test Width
11.
UNTIL
DIAGNOSTICS
Printer Tests