Instruction manual

1Index
Index
Numbers
15V PWR FAIL *, 3–4
23.5V PWR FAIL *, 3–4
48V PWR FAIL *, 3–4
8.5V PWR FAIL *, 3–4
A
A TO D OVERUN *, 3–4
Abbreviations, E–1
About the printer, 1–2
ACCESS NULL PTR *, 3–4
Acronyms, E–1
Adjustments, 4–1
end of forms distance, 4–20
hammer phasing, 4–25
installing software, 4–27
paper drive motor pulley alignment, 4–8
paper feed timing belt tension, 4–4
paper scale, 4–10
platen gap, 4–12
platen open belt, 4–6
platen open motor pulley alignment, 4–14
ribbon guide, 4–16
software upgrades, 4–27
splined shaft skew adjustment, 4–18
ASCII Character Set chart, 3–43
B
Belt
paper feed timing, replacement, 5–5
paper feed timing, tension adjustment, 4–4
platen open, replacement, 5–7
platen open, tension adjustment, 4–6
Block diagram, operator panel, 6–10
Boards, controller (CMX), 5–10
Boards: layouts, connections, and pin–outs,
A–1
BUFFER OVERFLOW, 3–4
C
Cable assembly
interconnections, A–1
part numbers, A–1
shell and cable replacement, 5–8
Cable connectors and shells, replacement,
5–8
Card cage, fan assembly, replacement, 5–17
Character Set, U.S. ASCII, 3–43
Characters, elongated, 6–3
Checks. See Preventive Maintenance Checks
and Services
Checks and Service, 2–2
Preventive Maintenance, 2–2
Circuit board, replacement
controller, 5–10
power supply, 5–12
Circuit breaker, replacement, 5–13
Cleaning
card cage fan assembly, 2–8
shuttle frame assembly, 2–6
Cleaning the printer, 2–1
CLEAR key, 1–8
CLEAR PAPER JAM, 3–4
Clearing LCD messages, 3–3
CLEARING PROGRAM FROM FLASH,
4–29, 4–31