Instruction manual

2–2
Scheduled Maintenance
Preventive Maintenance Checks and Services
Perform preventive maintenance checks and services at the intervals
specified in Table 2–1.
Do these checks more often if the printer is used for heavy–duty, continuous
printing or is located in a dusty area.
WARNING
Always disconnect the AC power cord before performing scheduled
maintenance. Failure to do so could result in injury to you or damage to
equipment.
Table 2–1. Preventive Maintenance Checks and Services
Interval Procedure
Inspect the printer.
Clean the printer.
Check and adjust
the platen gap.
Every 6 months*
—or—
Every 1000 hours of
operation*
—or—
At every service call*
Page
2–3
2–4
4–12
* Whichever occurs first.