Instruction manual

5–17
Replacement Procedures and
Illustrated Parts List
Fan Assembly, Card Cage
Removal
1. Prepare the printer for maintenance (page 4–2).
2. Remove the paper path (page 5–29).
3. Disconnect the fan cable connector. (See Figure 5–15, page 5–69.)
4. Remove the mounting screws from the bottom of the fan.
5. Remove the card cage fan assembly from the card cage.
Installation
CAUTION
Air flow is INTO the card cage. Make sure to install the fan so the label
faces toward the inside of the printer and the cable faces the front of the
printer.
1. Install the shield and the screw securing it to the card cage fan (See
Figure 5–15, page 5–69.)
2. Position the card cage fan assembly in the card cage and install the two
fan mounting screws.
3. Connect the fan cable connector (page 5–69, Figure 5–15).
4. Install the paper path (page 5–29).
5. Return the printer to normal operation (page 4–3).