Instruction manual

4–30
Adjustment Procedures
Message
Required
Action
Explanation
ERROR: FLASH
NOT DETECTED
The printer could not find any flash
memory.
Install flash memory
before attempting to
download this
program.
ERROR: NO DRAM
DETECTED
The printer could not find any
DRAM.
Check DRAM on
CMX. If present,
reseat DRAM, If
missing, install
DRAM.
ERROR: NVRAM
FAILURE
The security PAL is not present or
the non–volatile memory has failted.
Check the security
PAL at location U54
on the CMX
controller. If the
PAL is absent,
install PAL. If
security PAL is
present, replace the
CMX controller
board. (Do NOT
attempt to replace
NVRAM.)
ERROR: PROGRAM
NEEDS MORE DRAM
The printer requires more DRAM
memory in order to run the
downloaded program.
Add DRAM or use a
smaller emulation
program.
ERROR: PROGRAM
NEEDS MORE FLASH
The printer requires more flash
memory in order to run the
downloaded program.
Add flash memory
or use a smaller
emulation program.
ERROR: PROGRAM
NOT COMPATIBLE
The printer is not compatible with
the downloaded program. User tried
to load CMX–compatible diskette in
CBO–controlled printer, or vice
versa.
Use the correct
emulation software
option(s) for this
model.
ERROR: PROGRAM
NOT VALID
The printer does not see a program
in flash memory.
There is no program
in printer memory.
Go to step 2.
ERROR: SHORT AT
ADDRESS XXXX
Hardware failure in DRAM or CMX
controller circuitry.
Replace DRAM. If
message occurs with
new DRAM, replace
CMX controller
board.