User guide

Advancing the Paper for Tearing-off
The TEAR/VIEW MODE Option of Set-Up mode allows you to manage the automation of paper
movements for specific purposes. Advancing the paper for tearing-off is affected by this
automation management.
The following description shows an example of how to use your printer features in the most
automatic way possible. We assume that the TEAR/VIEW MODE Option is set to one of the
Auto. advance Values. For more information about managing the advancing the paper for
tearing-off, see Chapter 7 "Customizing Macros".
To advance the paper for tearing-off during a print task:
1. Press the
Pause
button.
The printer finishes printing the current line. The paper is fed so that the last printed line is
above the tear bar.
2. Press the
FF/Load
button.
The paper is fed so that the perforation faces the tear bar.
To advance the paper for tearing-off at the end of a print task:
1. Ensure that the TEAR/VIEW MODE Option in the Set-Up is set to one of the
Auto. advance Values and that the printed file includes a final Form Feed command.
2. Just wait the end of the time-out to see the paper perforation automatically being fed to the
tear bar.
pos5
The Tearing-off Paper Position
Handling Different Types of Paper
3-40